After the launch of firmware for Asia (Singapore), Samsung has brought much awaited firmware for my Middle East friends. Europe and Asia firmware’s gave a lot of trouble to Middle East users because of keyboards layout and NO ARABIC support. So finally for them, the wait is over. Few days back Gingerbread for Samsung galaxy Pro B7510 was launched for Middle East.
Details of Firmware file:
|
Filename |
B7510JPKP6 |
|
Region |
Middle East |
|
CSC |
B7510OJPKP5 |
Steps before Upgrading:
- Take backup of Contacts. Go to Contacts > Press Menu button > Click on More > Import/Export > Export to SD card > Confirm by pressing Yes.
- Take backup of your messages. For this you need an app. I personally use SMS backup & Restore Pro by Ritesh Sahu, you can get it for free, check this article.
- Take backup of the installed apps. For this you need to use a file explorer app, I used ES File Explorer. To take the backup of the apps installed, Open ES File Explorer > Press Menu button > Click on Manager > Click App Manager > Press Multi-select button on the top and select all the apps > Press Menu key > Click on Backup. The backup will be taken in SD card “backup” folder.
- Take backup of current settings and application data. Go to Settings >Privacy settings > Put a check mark on Back up my data and Automatic Restore.
- Shut down your galaxy pro and remove SD card and SIM card. (Don’t Power On your galaxy pro)
Files required for the process:
Firmware file: Click here to download.
Bennett_v1.0 ops file: Click here to download.
Odin downloader: Click here to download.
Unzip and extract the files that you have downloaded to a specific folder.
Step By Step Process:
- Press Power and Q button of your Galaxy Pro simultaneously to enter in Download mode.
- Run Odin downloader in your PC.
- Once you are in the Download mode, connect it to USB data cable and wait for ODIN to detect the phone. Once detected, the COM PORT 1 MAPPING box will become yellow and the phone’s port will be detected.
- Put a check mark on Auto reboot and Protect OPS.
- Click on OPS to browse and select the OPS file. You need to go the destination folder where you have extracted Bennett_v1.0 ops file.
- Put a check mark on One Package and browse and select the firmware file in the last box that is ONE PACKAGE. You will get the following message once firmware file is checked:
Check Message
<1> Added!!!<1> Detected!!!Check MD5 FileName…MD5 File Name : B7510JPKP6_B7510OJPKP5_B7510JPKP6_HOME.tarOpen File Name : B7510JPKP6_B7510OJPKP5_B7510JPKP6_HOME.tarCheck MD5 …Tail MD5 : D3472823DDDDC611987070A026858973
Image MD5 : D3472823DDDDC611987070A026858973
Check MD5 … ok
- Now click on start. Wait until the green bar in the first box reached to the end. It will reboot your Galaxy Pro twice or thrice.
- Once done, it will give a message as PASS in the COM PORT box as well as message section.
Complete Message Log
Download Start…<0> Create File…<1> StartThread Detected : 1<2> StartThread Detected : 0<3> StartThread Detected : 0<4> StartThread Detected : 0<5> StartThread Detected : 0
<6> StartThread Detected : 0
<7> StartThread Detected : 0
<8> StartThread Detected : 0
<1> setup connection…
<1> odin mode.. check plcatform verification.
<1> VerifyPlatform:V0, P0,R0
<1> START!!!
<1> set download environment.
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> big partition size!!
<1> mibib download..
<1> 1/9 Finished.
<1> qcsbl download..
<1> 2/9 Finished.
<1> oemsbl download..
<1> 3/9 Finished.
<1> amss download..
<1> 4/9 Finished.
<1> arm11boot download..
<1> 5/9 Finished.
<1> boot.img download..
<1> 6/9 Finished.
<1> recovery.img download..
<1> 7/9 Finished.
<1> system.rfs download..
<1> 8/9 Finished.
<1> csc.rfs download..
<1> 9/9 Finished.
<1> reset pda..
<0> Started Timer
<1> Close serial port and wait until rebooting.
<1> PASS!!!
<0> Destroy instant..
<0> Killed timer
- Disconnect the phone from USB. Go to Settings > About Phone and check the Firmware Version.
- Restore the phone back to factory settings to wife off the data. To do it Go to Settings > Privacy settings > Factory Data reset.
- Once it restarts, shut it down again and insert SD card and SIM card and now your Samsung Galaxy Pro is just like a brand new handset with android gingerbread.
- You can follow this article if you want to setup up phone for the first time.
Warning: Make sure your cell is fully charged while doing this and take proper back up of apps, contacts and SMS before trying this. As we mentioned, we have done successful upgrades on 10 handsets and all of them are working fine. If you face any problem you can write it in comment, we will help you out. Do at your own risk. We will not be responsible if you end up screwing your phone.
Noticeable changes after Gingerbread Update:
- New languages support.
- Arabic language support.
- Arabic keyboard fix.
- New USB utilities option is Settings for quick Mass storage mode.
- Shortcut for Data Network Mode by pressing the power key.
Also Check:
How to upgrade Samsung Galaxy Pro B7510 to Gingerbread 2.3.6 for EUROPE
How to root Samsung Galaxy Pro B7510 Gingerbread
Upgrade Samsung galaxy Pro B7510 to Gingerbread 2.3.6 Asia Firmware
How to download paid Android apps for free
[Article View] : 13624
Android Feeds
Is Their Anyway To Upgrade Galaxy Pro to Ice Cream sandwich
Hey Sid… You Seems Interested In Galaxy Pro Very Much… But The Samsung Guys Are Not..
Any Way To Get Multi Touch
No multi touch possible and don’t think abt ICS.. galaxy pro doesnt have sufficient hardware requirements for ICS upgrade
ics graphics driver is now available for adreno 200 and galaxy 5 can get it..y cant galaxy pro…also android 4.04 supports qvga display..so pro can still be a pro with ics .
Hello, there are several files when you extract the firmware rar unlike the asian firware there was only one. Which file should we choose?
Unable to find File Name : B7510JPKP6_B7510OJPKP5_B7510JPKP6_HOME.tar
And I updated my phone as per the steps given !
Now Its not Getting on !
And how much time it takes to update “
Great!
I am going to upgrade this!
Thanks Sid for informing us & for great tutorial!
Hope SomeOne Will Find A Way To Enable Multi Touch On The Pro… Its The Most Required
Feature.. I Didnt Knew It When I Bought The Pro…
Thought All Androids Will Have Multi Touch
I Already Upgraded To The Europe Firmware… Is It Very Necessary That I Should Upgrade to Asian Or Middle East Firmware…. Can I Download Only The Firmware File Excluding The Bennett_v1.0 ops file & Odin Which I Already Have From The Last Upgrade??
Successfully upgraded!
But after udgrade
Thier is no
1) USB Utility option
2) Data Connectivity shortcut
3) Selction of GSM/CDMA Networks
And also
Symbol key doen’t work!
while all is working fine…:-)
hey… when i extracted the firmware file there are 5 md5 files which get extracted :
APBOOT_B7510JPKP6_CL3741_REV00-user_low_true.tar.md5
CODE_B7510JPKP6_CL783741_REV00_user_low_true.tar.md5
GT-B7510-MULTI-CSC-OJPKP5.tar.md5
MODEM_B7510JPKP5_CL773503_REV00.tar.md5
which among these should i select in step no.6 ?
hey… when i extracted the firmware file there are 5 md5 files which get extracted :
APBOOT_B7510JPKP6_CL3741_REV00-user_low_true.tar.md5
CODE_B7510JPKP6_CL783741_REV00_user_low_true.tar.md5
GT-B7510-MULTI-CSC-OJPKP5.tar.md5
MODEM_B7510JPKP5_CL773503_REV00.tar.md5
which among these should i select in step no.6 ?
Click on OPS to browse and select Bennett_v1.0 ops
Click on Boot to browse and select APBOOT_B7510JPKP6_CL3741_REV00-user_low_true.tar.md5
Click on Phone to browse and select MODEM_B7510JPKP5_CL773503_REV00.tar.md5
Click on PDA to browse and select CODE_B7510JPKP6_CL783741_REV00_user_low_true.tar.md5
Click on CSC to browse and select GT-S5660-GT-B7510-MULTI-CSC-OJPKP5.tar.md5
Sorry guys if any step was wrongly written.. my frnd who uses arab galaxy pro tested this firmware first so he did nt send me clear steps…i had to download and check the file now !!
Thanks. I’m planning to do this, but before that just wanted to know if there is anyway i can switch back to froyo in case i’m not very pleased with gingerbread… Also, what’s the procedure to root the gingerbread?
hi sid,,,,, my question is not really related to g-pro,,,, my question is do you have any idea of wondering what would be the cause of regarding wifi issue on sgy,,,, a lot of my frnds asking me on this,,, is it the firmware of 2.3.6v cause it? or its just a bug? can you help me and others to to fix this problem,,,,, tnx in advance,,,,,,,,
SID what are the languages available???
Can I Use Mobile Odin…. Will It Work
Tiene disponible espaÑol. Ya se que la eurpoa si pero es muy inestable. Ahorita tengo la asiatica pero me interesaria en español. Una pregunta. Alguien sabe para que es ek opensource de este dispositivo. Puedo modificar el idioma con eso ???
pleas help me i finish the update but don’t have Arabic ?
what is the problem ?
hi SID…
pls is der anyway to get adobe flash player for galaxy pro
desperately waiting for 2.3.6 for india. please update me on my email as soon as its relesed…
so…what about the one package selection??
what should i select when i browse the one package button?? plz help
Hi SID,
I need a Root and Unroot file for Samsung Galaxy PRO.
can u share / mail the link to my ID pls
i wanted to upgrade to Middle East Firmware..
and waitng for Indian Gingerbird or above ver
Sam
SID,
Hav u cheked all the steps and noticable changes for this updates.
please let us knw so that we can update to this version.
would u please post the steps again to avoid our confusions…
thnx buddy
unable to download
Bennett_v1.0 ops file:
Odin downloader
from 4shared can u upload n share hotfile link
thnx
Can you tell me what is the Diffrence between Asia firmware and Europe Firmware?
I have Successfully upgraded my galaxy pro
but i doesnt share my installed apps via bluetooth. which is possible through other gingerbread devices
what can i do
Successfully upgraded!
after udgrade
There is no
1) USB Utility option
2) Data Connectivity shortcut
3) Selction of GSM/CDMA Networks
Sym key working but we need to enable
on screen keyboard for this..
Hello dear ,
i live in dubai, and whenever i connect my samsung galaxy pro with pc for upgrade kies shows a messege ” your device does not support software upgrade with kies ” what i need to do please advice ..
Awaits for your earliest reply..
Regards.
ALI
guys please help me .. is their any other site where i can download bennett ? coz in 4shared its contains nothing .. please response
ali:
unistall Kies from ur PC
download
Odin
Firmware file &
Bennett_v1.0 ops file
Take Backup of ur phne..
remove SD card & sim and follow above procedure to upgrade firmware
That sound great in the time I am selling the phone already
…, getting ZTE Skate, any fresh ROMS for it 
?
Hey any expectancy on India version of Gingerbread for this phone? Its been due pretty long I see.
I hope it comes with the bugs fixed whenever it is out
after udgrade
There is no
1) USB Utility option
2) Data Connectivity shortcut
3) Selction of GSM/CDMA Networks
can i get the updates with above options
after udgrade
There is no
1) USB Utility option
2) Data Connectivity shortcut
3) Selction of GSM/CDMA Networks
can we get the updates with above features
i upgraded my phone .. middle east version. and am facing a really bug problem here.. can’t change the phone from 3G network to 2G network ! idk whyy !!
I upgraded and everthing went fine, however the Arabic language is not supported as its not in the languages list.
please advice
I did the upgrade every think was good and i get the arabic language
Thanks for all of you gays.
hi every one…
Its urgent ,,,kindly help me
I have installed rom manager in my galaxy pro..b 7510 and clicked on back up my current rom, but it switched off and is not getting on…
please help
hi every one…
Its urgent ,,,kindly help me
I have installed rom manager in my galaxy pro..b 7510 and clicked on back up my current rom, but it switched off and is not getting on…
please help
hi plz if you can uploade firmware on the any host bcus i cant download form hotfile thx
buddy i finished all yuo said..but ma fone its not restarting..help me bro
Hello and many thanks for anyone who contributed to release the update.
There is a language switching propblem with the hard keyboard. I cant switch using the sym key as I used to using stock os.
Please help.
Hey from where dyu get these firmware files?
is there any problem in this update i download all file to upgrade but i still afraid about the problem who’s another Persons talking about it
Bennet file is not available ,,,it shows “0 kb”
Is there any way to upgrade my galaxy pro B7510 to
anroid os 4??????????????
???
Hey Sid, (URGENT HELP/ URGENT NOTE)
i am stuck in strange “mobile yellow tringle pc” logo from past three days while tried to update it to 2,3
can you please help me by telling me what to do by step by step,
my phone went dead because of it and friend come on its a new year i need to do it as soon as possible
hey sid i think i got a wrong step done my phone started to go balnk balck i dont know what to do please help
I noticed that the version that belong to the Middle East is not like other copies
like if i want to change from 2G to 3G i can,t in middle east version but in the other copies I can change it why help me Sid
ok ok
i learn how to change it
by calling *#*#4636#*#*
than go to phone info go dawn set to what you like